Switch Clip

Blog · Use cases

How to Reduce Glare on Glass and Packaging When Filming Shorts

Glass and packaging flash because light hits the object and bounces straight into the camera. Turning the object or the camera just a little makes the reflection disappear. Soften the light after that and it looks much cleaner.

The order for cutting reflections

  1. 1

    Find the bright spots on screen

    Before filming, check your phone screen for white dots or streaks.

  2. 2

    Turn the object slightly

    This is the easiest fix. Rotate it bit by bit until you find the angle where the glare drops out.

  3. 3

    Change the camera height

    Shooting from slightly above or to the side, rather than head-on, reduces reflections.

  4. 4

    Move the light to the side

    With the light behind the camera, the reflection comes straight back. Light it from the side.

Softer light without gear

  • Hang a sheer curtain or white cloth over the window
  • Turn off the ceiling light and use window light alone
  • Stand white paper beside the object to brighten the dark side
  • Turn off the phone flash

When your own reflection shows

Glass and metal can also reflect you and your phone. Wear dark clothes, or set the camera a little farther back and zoom in. Smooth the wrinkles out of packaging and there are fewer surfaces to throw light. Finally, check once more that the side with the product name reads without glare.

Pick a video, get up to 6 Shorts

Switch Clip gathers videos you are allowed to reuse and public-domain classics. Pick one and you get Shorts with captions, a title, commentary and the credit line. Your first one is free, no sign-up.

Make a Short for free

Frequently asked questions

Can I remove reflections in editing?

It's hard to do and takes a lot of time. Changing the angle while you film is far quicker.

Is a little reflection okay?

A bit of sparkle on glass shows its texture, so some is good. Fix it only when it hides text or the contents.

The glare is worse when I film at night.

That's because the light comes from a single point. Aim a desk lamp at the wall and film with the bounced light.

Keep reading